Title :
An optimization technique for RF buffers with active inductors
Author :
Lee, Tai-Cheng ; Huang, Yen-Chuan
Author_Institution :
Dept. of Electr. Eng., Nat. Taiwan Univ., Taipei, Taiwan
Abstract :
An RF buffer is used between the frequency synthesizer and its loads. A technique of sizing RF buffers is presented to optimize with minimum power dissipation. By using the proposed current-reusing technique, the operating frequency of the RF buffer can be further increased with the same power consumption. The same technique can be also applied to reduce power by a factor of two while keeping the same operating frequency. The analysis is also verified by the circuit simulation.
Keywords :
CMOS integrated circuits; buffer circuits; circuit simulation; inductors; integrated circuit design; radiofrequency integrated circuits; transceivers; CMOS process; RF buffer sizing; RF buffers; RF receivers; RF transceiver; RF transmitters; active inductors; circuit simulation; current-reusing technique; frequency synthesizer; minimum power dissipation; operating frequency; optimization technique; power consumption; Active filters; Active inductors; Band pass filters; Capacitors; Energy consumption; Frequency synthesizers; Gyrators; Radio frequency; Transconductance; Voltage-controlled oscillators;
Conference_Titel :
Circuits and Systems, 2005. ISCAS 2005. IEEE International Symposium on
Print_ISBN :
0-7803-8834-8
DOI :
10.1109/ISCAS.2005.1465431
