Title :
Lyapunov-based tracking control in the presence of uncertain nonlinear parameterizable friction
Author :
Makkar, C. ; Dixon, W.E. ; Sawyer, W.G. ; Hu, G.
Author_Institution :
Dept. of Mech. & Aerosp. Eng., Florida Univ., Gainesville, FL, USA
Abstract :
Modeling and compensation for friction effects has been a topic of considerable mainstream interest in motion control research. This interest is spawned from the fact that modeling nonlinear friction effects is a theoretically challenging problem, and compensating for the effects of friction in a controller has practical ramifications. If the friction effects in the system can be accurately modeled, there is an improved potential to design controllers that can cancel the effects; whereas, excessive steady-state tracking errors, oscillations, and limit cycles can result from controllers that do not accurately compensate for friction. A tracking controller is developed in this paper for a general Euler-Lagrange system that contains a new continuously differentiable friction model with uncertain nonlinear parameterizable terms. To achieve the semi-global asymptotic tracking result, a recently developed integral feedback compensation strategy is used to identify the friction effects on-line, assuming exact model knowledge of the remaining dynamics. A Lyapunov-based stability analysis is provided to conclude the tracking and friction identification results. On-going efforts are being directed at the development of an experimental testbed to illustrate the tracking and friction identification performance of the developed controller.
Keywords :
Lyapunov methods; compensation; control system synthesis; feedback; friction; motion control; nonlinear control systems; stability; uncertain systems; Lyapunov-based stability analysis; Lyapunov-based tracking control; friction effects; general Euler-Lagrange system; integral feedback compensation strategy; motion control; steady-state tracking errors; uncertain nonlinear parameterizable friction; Error correction; Feedback; Friction; Limit-cycles; Motion control; Nonlinear control systems; Nonlinear dynamical systems; Stability analysis; Steady-state; Testing;
Conference_Titel :
American Control Conference, 2005. Proceedings of the 2005
Print_ISBN :
0-7803-9098-9
Electronic_ISBN :
0743-1619
DOI :
10.1109/ACC.2005.1470259