Sensitivity analysis of friction welded AISI52100 grade carbon steel rods

Author

Selvamani, S.T. ; Vigneswar, K. ; Harikumaran, K. ; Premkumar, S. ; Umanath, K.

Author_Institution

Dept. of Mech. Eng., Vel Tech Multi Tech Eng. Coll., Chennai, India

fYear

2014

Firstpage

1

Lastpage

5

Abstract

In this work, friction welding of AISI 52100 grade carbon steel rods of 12mm diameter was investigated with an aim to analyze the sensitivity of Tensile strength for the process parameter. Welds are made with various process parameter combinations using ANOVA design matrix which were subjected to tensile tests. The Ultimate tensile strength of the welded joints has been reported. A microstructure analyses were carried out to acquire the joint efficiency. The various zones of the microstructure have been shown in the optimized condition.

Keywords

carbon steel; friction welding; rods (structures); sensitivity analysis; statistical analysis; tensile strength; tensile testing; ANOVA design matrix; friction-welded AISI52100 grade carbon steel rods; microstructure analysis; microstructure zone; process parameter combinations; sensitivity analysis; tensile tests; ultimate tensile strength; welded joints; Friction; Joints; Sensitivity; Steel; Velocity control; Welding; AISI 52100 grade carbon steel; Friction welding; Tensile strength; grain structure; sensitivity;

fLanguage

English

Publisher

ieee

Conference_Titel

Science Engineering and Management Research (ICSEMR), 2014 International Conference on

Print_ISBN

978-1-4799-7614-0

Type

conf

DOI

10.1109/ICSEMR.2014.7043572

Filename

7043572