Improvement of the 2D SLAM system using Kinect sensor for indoor mapping

Simultaneous localization and mapping (SLAM) is an important system for making fully autonomous robot navigation system. A robot must have a good understanding of the environment for navigation. Mobile robot using fixed laser range finder can only detect obstacle on a particular plane level. This may lead to missing of important obstacles that are both above or below the laser scan level. This will cause the map generated to be inaccurate and collision may happen during autonomous navigation. The Microsoft Kinect sensor can replace a laser range finder in a mobile robot as a low cost alternative while providing 3D data. Using depth image data from Kinect, the obstacles between ground surface and 500mm high are projected to horizontal surface, and converted to laser scan data. This will include the entire obstacles that the robot might collide into. Simulations and experiments have been conducted to test out the method in SLAM process in an indoor environment. Both simulation and experimental results show that the proposed method is capable of getting more detailed map compared to the normal 2D map.