Thermoelectric power measurements between 300-1200 K using high temperature Peltier modules

Author

Scherrer, H. ; Jahed, M.M. ; Riffel, M. ; Poche, C. ; Scherrer, S.

Author_Institution

Lab. de Phys. des Mater., Ecole des Mines, Nancy, France

Volume

1

fYear

2000

fDate

2000

Firstpage

135

Abstract

A measurement technique for the thermoelectric power of thermoelectric materials between 300 and 1200 K is proposed and described. The temperature regulation uses the Peltier effect or the Joule effect provided by thermoelectric modules. The Peltier modules are built using FeSi₂ material, allowing for a precise and fast temperature control. The technique of fabrication of the modules as well as the measurement set-up are described and discussed. Some thermoelectric power experimental data are shown

Keywords

Peltier effect; iron alloys; power measurement; silicon alloys; thermoelectric conversion; thermoelectric power; 300 to 1200 K; FeSi₂; FeSi₂ material; Joule effect; Peltier effect; fabrication; measurement set-up; measurement technique; temperature control; temperature regulation; thermoelectric materials; thermoelectric modules; thermoelectric power measurements; Conducting materials; Contacts; Copper; Fabrication; Measurement techniques; Power generation; Power measurement; Temperature control; Thermoelectricity; Voltage measurement;

fLanguage

English

Publisher

ieee

Conference_Titel

Energy Conversion Engineering Conference and Exhibit, 2000. (IECEC) 35th Intersociety

Conference_Location

Las Vegas, NV

Print_ISBN

1-56347-375-5

Type

conf

DOI

10.1109/IECEC.2000.870651

Filename

870651