Turn-by-turn beam position measurement for 1.3 GeV booster synchrotron

Author

Ueng, T.S. ; Hsu, K.T. ; Fang, C.S. ; Chang, Y.M. ; Lin, K.K.

Author_Institution

Synchrotron Radiat. Res. Center, Hsinchu, Taiwan

Volume

4

fYear

1995

Firstpage

2524

Abstract

A prototype turn-by-turn beam position measurement system has been implemented to characterize machine properties of 1.3 GeV booster synchrotron at SRRC. The signals picked up by button electrodes are processed by heterodyne receivers. The output of the receiver is digitized by VXI module with digitizing rate equal to the beam revolution frequency. The beam positions are calculated at embedded VXI controller under HP/UX environment. The performance of the data acquisition system and the measured data are presented

Keywords

accelerator control systems; analogue-digital conversion; computerised control; controllers; data acquisition; electron accelerators; high energy physics instrumentation computing; particle beam diagnostics; position measurement; synchrotrons; 1.3 GeV; HP/UX environment; SRRC; VXI module; beam revolution frequency; booster synchrotron; button electrodes; data acquisition system; digitizing rate; embedded VXI controller; heterodyne receivers; machine properties; turn-by-turn beam position measurement; Clocks; Control systems; Data acquisition; Electrodes; Extraterrestrial measurements; Frequency; Position measurement; Prototypes; Resonance; Synchrotron radiation;

fLanguage

English

Publisher

ieee

Conference_Titel

Particle Accelerator Conference, 1995., Proceedings of the 1995

Print_ISBN

0-7803-2934-1

Type

conf

DOI

10.1109/PAC.1995.505605

Filename

505605