DocumentCode
3574978
Title
Flexible current clamp sensor using screen-printed coil
Author
Yamashita, Takahiro ; Yi Zhang ; Itoh, Toshihiro ; Maeda, Ryutaro
Author_Institution
NMEMS Technol. Res. Organ., Tsukuba, Japan
fYear
2014
Firstpage
1
Lastpage
4
Abstract
This paper reports a novel flexible current clamp sensor with 480 turns silver paste coil (line/space = 50 μm/50 μm) formed by through-holes and screen-printing technologies. Using screen-printing techniques, fine stripe patterns could be formed on 50 mm long and 10 mm wide polyimide film in a few seconds. Coil resistance between contact pads is about 2.3 kΩ. The sensor is developed using only coating, through-holes laser drilling and screen-printing technologies. Therefore it can be fabricated by reel-to-reel continuous film processing systems.
Keywords
coils; contact resistance; electric current measurement; electric sensing devices; flexible electronics; thick films; coil resistance; flexible current clamp sensor; reel-to-reel continuous film processing systems; screen-printed coil; screen-printing technologies; through-holes laser drilling; Clamps; Coils; Fabrication; Films; Lasers; Silver; Smart grids; coil; current sensor; flexible; screen-printing; through-holes;
fLanguage
English
Publisher
ieee
Conference_Titel
Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP), 2014 Symposium on
Print_ISBN
978-2-35500-028-7
Type
conf
DOI
10.1109/DTIP.2014.7056662
Filename
7056662
Link To Document