Common mode impedance model of power electronic equipment to evaluate noise reduction effect of a line noise filter

Author

Kanda, Mitsuhiko ; Oka, Naoto ; Nitta, Shuichi

Author_Institution

Inf. Technol. R&D Center, Mitsubishi Electr. Corp., Kamakura, Japan

Volume

1

fYear

2000

fDate

2000

Firstpage

65

Abstract

Line noise filters are used to suppress the conductive noise on AC-mains. A common mode impedance model of equipment is proposed in order to evaluate the noise reduction effect of line noise filters. First, the article describe how the common mode impedance model is obtained from the equipment equivalent circuit model. Next, in a comparison of the impedance calculated from the model with the measured impedance, it is concluded that the common mode impedance model is useful for prediction of common mode noise suppression

Keywords

electric impedance measurement; electronic equipment testing; equivalent circuits; interference suppression; noise; passive filters; power electronics; power filters; AC-mains; common mode impedance model; common mode noise suppression; conductive noise suppression; equipment under test; equivalent circuit model; line noise filter; measured impedance; noise reduction effect; power electronic equipment; Circuit noise; Conductivity measurement; Earth; Filters; Impedance measurement; Inverters; Noise figure; Noise measurement; Noise reduction; Power system modeling;

fLanguage

English

Publisher

ieee

Conference_Titel

Electromagnetic Compatibility, 2000. IEEE International Symposium on

Conference_Location

Washington, DC

Print_ISBN

0-7803-5677-2

Type

conf

DOI

10.1109/ISEMC.2000.875539

Filename

875539