Title :
Enhancement of natural convection heat transfer from a pin fin
Author :
Murali, J. Ganesh ; Kannan, C. ; Sathyabalan, P.
Author_Institution :
Dept. of Automobile Eng., Karpagam Coll. of Eng., Coimbatore, India
Abstract :
In this investigation, the enhancement of natural convection heat transfer from a pin fin of length 145 mm and diameter of 19.875 mm is examined. An experimental set up has been prepared and experiments were carried out for ten different materials in natural convection mode. Then the same 10 materials were analyzed under the same heat loss conditions with black coat and then a comparative study was made between the coated fin and the uncoated fin. The comparison shows that there is a significant improvement in heat loss characteristics of pin fin made up of materials E8 E9 with black coat.
Keywords :
heat losses; mechanical products; natural convection; black coat; heat loss condition; natural convection heat transfer; pin fin; Heat sinks; Heat transfer; Heating; Steel; Temperature; Temperature measurement; Natural convection; heat transfer enhancement; pin fin;
Conference_Titel :
Intelligent Systems and Control (ISCO), 2014 IEEE 8th International Conference on
Print_ISBN :
978-1-4799-3836-0
DOI :
10.1109/ISCO.2014.7103918