The fatigue strength analysis of the pump shaft of RCV charging pump

Author

Xiaohong Weng ; Hongyan Song ; Jin Jiang

Author_Institution

Key Lab. of Hydraulic Machinery Transient, Wuhan Univ., Wuhan, China

fYear

2014

Firstpage

1

Lastpage

6

Abstract

In the paper, the focus is on the pump shaft of RCV charging pump and the stress and fatigue life of the annular groove where the pump shaft is the easiest to fracture is emphatically calculated. The analysis involves the following steps: setting up the geometrical model of the pump shaft by using software Solidworks; performing the finite element mesh division and the boundary condition of load for the pump shaft by using the HyperMeh software; The stress calculation under certain load of the pump shaft by using the ABAQUS software provides stress data for the fatigue analysis of the annular groove. In the paper, the analysis model of the pump shaft fatigue life is set up, and the fatigue safety coefficient of the pump shaft is calculated.

Keywords

CAD; fatigue; finite element analysis; fracture; life testing; mechanical engineering computing; mesh generation; pumps; shafts; stress analysis; ABAQUS software; HyperMeh software; RCV charging pump; Solidworks software; annular groove; boundary condition; fatigue safety coefficient; fatigue strength analysis; finite element mesh division; fracture; geometrical model; pump shaft fatigue life; stress analysis; Annular Groove; Fatigue Analysis; Fatigue Safety Coefficient; Finite Element Analysis; The Pump Shaft;

fLanguage

English

Publisher

iet

Conference_Titel

Fluid Machinery and Fluid Engineering, 2014 ISFMFE - 6th International Symposium on

Print_ISBN

978-1-84919-907-0

Type

conf

DOI

10.1049/cp.2014.1248

Filename

7124169