Title :
Strain-Induced High Coercivity in La0.7Sr0.3CoO3 Films
Author :
Zhao, Y.Y. ; Yang, H.W. ; Liu, Y. ; Kuang, H. ; Zhang, M. ; Zuo, W.L. ; Wang, J. ; Hu, F.X. ; Sun, J.R. ; Shen, B.G.
Author_Institution :
State Key Lab. of Magn., Inst. of Phys., Beijing, China
Abstract :
Here, we report strain-induced high coercivity in La0.7Sr0.3CoO3 (LSCO) films, which suffer in-plane tensile strains due to the positive lattice mismatch between the substrate and the LSCO bulk. The films on (011)-0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 exhibit large uniaxial anisotropy, large coercivity, and high saturation magnetization at low temperature in contrast to the well soft magnetic behaviors in LSCO bulk. It is found that the coercivity of the 40 nm (001)-LSCO/SrTiO3 film can be as high as 1.45 T at 10 K and the observed coercivity decreases rapidly as the thickness increases, though the Curie temperature is below room temperature. The large coercivity and anisotropy should be closely related to the strain-induced structural changes and the different orbital ordering of Co3+ and Co4+ ions. Meanwhile, the enhanced domain wall pinning by the tensile strain may also contribute to the observed high coercivity.
Keywords :
Curie temperature; coercive force; lanthanum compounds; magnetic anisotropy; magnetic domain walls; magnetic thin films; permanent magnets; soft magnetic materials; strontium compounds; tensile strength; Co3+ ions; Co4+ ions; Curie temperature; La0.7Sr0.3CoO3; PMN-PbTiO3; enhanced domain wall pinning; films; in-plane tensile strains; orbital ordering; positive lattice mismatch; saturation magnetization; soft magnetic behaviors; strain-induced high coercivity; strain-induced structural changes; uniaxial anisotropy; Coercive force; Lattices; Magnetic films; Saturation magnetization; Substrates; Tensile strain; High coercivity; high coercivity; non-rare-earth permanent magnets; spin; strain effect;
Journal_Title :
Magnetics, IEEE Transactions on
DOI :
10.1109/TMAG.2015.2434614
