GaN Microwave DC–DC Converters

This paper presents the design and characterization of dc-dc converters operating at microwave frequencies. The converters are based on GaN transistor class-E power amplifiers (PAs) and rectifiers. Three topologies are presented, which are: 1) a PA and synchronous rectifier, requiring two RF inputs; 2) a PA and self-synchronous rectifier with a single RF input; and 3) a power oscillator with a self-synchronous rectifier with no required RF inputs. The synchronous 1.2-GHz class- E² converter reaches a maximum efficiency of 72% at 4.6 W. By replacing the RF input at the rectifier gate with a specific termination, a self-synchronous circuit demonstrates 75% efficiency at 4.6 W, with a maximum output power of 13 W at 58% efficiency. In the third topology, the PA is replaced by a power oscillator by providing correct feedback for class-E operation, resulting in a circuit requiring no RF inputs. This oscillating self-synchronous dc-dc converter is demonstrated at 900 MHz with an efficiency of 79% at 28 V and 12.8-W output power. Self-synchronous class-E transistor rectifier operation is analyzed theoretically in the time domain and validated with harmonic-balance simulations using an improved nonlinear model for a GaN HEMT. The simplified theoretical analysis provides a useful starting point for high-efficiency self-synchronous power rectifier design, which can, in turn, be extended to high-efficiency oscillating power inverter design.