• DocumentCode
    3622758
  • Title

    Reinforcement Learning Control for Biped Robot Walking on Uneven Surfaces

  • Author

    Shouyi Wang;J. Braaksma;R. Babuska;D. Hobbelen

  • Author_Institution
    Delft Center for Systems and Control, Delft University of Technology, Mekelweg 2, 2628 CD Delft, the Netherlands
  • fYear
    2006
  • fDate
    6/28/1905 12:00:00 AM
  • Firstpage
    4173
  • Lastpage
    4178
  • Abstract
    Biped robots based on the concept of (passive) dynamic walking are far simpler than the traditional fullyI controlled walking robots, while achieving a more natural gait and consuming less energy. However, lightly actuated dynamic walking robots, which rely on the natural limit cycle of their mechanical structure, are very sensitive to ground disturbances. Already a very small step down can cause the robot to lose stability. In this paper, we investigate the use of reinforcement learning to make a dynamic walking robot more robust against ground disturbances. The learning controller is applied to a simulated two-link biped which is an abstraction of a mechanical prototype developed at the Delft Biorobotics Laboratory. The learning controller has been designed such that it can be applied as a straightforward extension of the proportionalI-derivative (PD) controller currently used to drive the robot´s pneumatic actuators. The learning controller is therefore suitable for the future implementation in the robot hardware. Simulation results demonstrate that the biped quickly learns to overcome step-down disturbances on the floor up to 10% of the leg length, without compromising the natural walking style provided by the PD controller, which was optimized for walking on an even surface.
  • Keywords
    "Legged locomotion","Learning","Robot control","Robot sensing systems","Proportional control","PD control","Limit-cycles","Stability","Robustness","Virtual prototyping"
  • Publisher
    ieee
  • Conference_Titel
    Neural Networks, 2006. IJCNN ´06. International Joint Conference on
  • ISSN
    2161-4393
  • Print_ISBN
    0-7803-9490-9
  • Electronic_ISBN
    2161-4407
  • Type

    conf

  • DOI
    10.1109/IJCNN.2006.246966
  • Filename
    1716675