DocumentCode :
3637270
Title :
Comparison of dynamic and static mechanical stress applied on soldered joints
Author :
Karel Dušek;Michal Urbánek
Author_Institution :
Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Electrotechnology, Technická
fYear :
2010
Firstpage :
204
Lastpage :
207
Abstract :
This article deals with the mechanical stress of lead free soldered joints. During usage of electrical equipment are found structural changes of soldered joints, which can lead to cracks or failure of the solder joints. Therefore solder joints have influence on a total quality of electronic assembly. Mechanical tests are mainly used for resistance evaluation of components, devices and whole products against stress. This stress takes effect during function, transport and storage of the devices. Mechanical stress can change electrical properties of the soldered joints, e.g. electrical resistance. Even a small change of the electrical resistance could cause the malfunction of the electrical equipment. In this article, the changes of the electrical resistance of dynamic and static stressed soldered joints (lead Sn62Pb36Ag2 and lead free Sn95,5Ag4Cu0,5) are compared.
Keywords :
"Stress","Resistance","Lead","Environmentally friendly manufacturing techniques","Joints","Soldering","Resistors"
Publisher :
ieee
Conference_Titel :
Electronics Technology (ISSE), 2010 33rd International Spring Seminar on
Print_ISBN :
978-1-4244-7849-1
Type :
conf
DOI :
10.1109/ISSE.2010.5547292
Filename :
5547292
Link To Document :
بازگشت