DocumentCode :
3676976
Title :
Conductive inkjet printed ultra-wideband (UWB) planar monopole antenna on low cost flexible PET substrate material
Author :
Daria C. Lane;Alejandro T. Castro;Satish K. Sharma
Author_Institution :
Department of Electrical and Computer Engineering, San Diego State University, 5500 Campanile Drive, CA, 92182-1309, United States
fYear :
2015
fDate :
7/1/2015 12:00:00 AM
Firstpage :
1958
Lastpage :
1959
Abstract :
Printed antennas on flexible substrate material are highly desirable for flexible circuits and wearable applications. An ultra-wideband (UWB) printed planar monopole antenna operating at 3.4-12 GHz was designed, modeled, fabricated, and tested for scattering parameters and radiation pattern response. The measured reflection coefficient magnitude for the fabricated antenna exhibits a bandwidth of 8.6 GHz, with near omnidirectional radiation patterns. For the sake of brevity, only some selected results are presented here.
Keywords :
"Antenna measurements","Antenna radiation patterns","Positron emission tomography","Substrates","Antenna feeds","Ultra wideband antennas"
Publisher :
ieee
Conference_Titel :
Antennas and Propagation & USNC/URSI National Radio Science Meeting, 2015 IEEE International Symposium on
Type :
conf
DOI :
10.1109/APS.2015.7305368
Filename :
7305368
Link To Document :
بازگشت