Union simulation on lower limbs rehabilitation robot based on MATLAB and ADAMS

For people who suffers the lower limbs motor dysfunction, using lower limbs exoskeleton rehabilitation devices is a very effective method to restore the motor ability of lower limbs. However, it works only if the device has a suitable mechanical structure and appropriate design parameters for the specific individual. To get this work completed, we carry out the modeling and simulation of a new proposed lower limbs rehabilitation robot with joint help of two kinds of software, i.e. the MATLAB and the ADAMS. Firstly, the three-dimensional model of the robot is created with the SolidWorks software. After importing the model into ADAMS, some essential kinematic pairs are added into the movable joints. Meanwhile, the control system model is established using the MATLAB/SIMULINK software. Then, the union simulation of the lower limbs rehabilitation robot is carried out by using the interface modular ADAMS/CONTROL. The results show that the proposed rehabilitation robot has a good kinematic performance, which means that the device can be used in the actual rehabilitation process. Besides, the results also indicate that the control method is of good trajectory tracking ability. These simulated results will be significant for the development of physical prototype of lower limbs rehabilitation robot.