Electrical power system support-function capabilities of residential and small commercial inverters

Presently, approximately 20 GW or 2% of the nation´s generating capacity comes from solar, and solar penetration is increasing. However, for this trend to continue without adversely affecting electrical power system (EPS) performance, the photovoltaic inverters must participate in voltage- and frequency-regulation requirements. EPS support capabilities under development are the low-/high-voltage and low/high-frequency ride through, volt-VAr, frequency-watt, watt-power factor, commanded power factor, commanded power functions, and others. Each of the functions have parameter set points, and most have ramp rates for implementation of the functions as defined in the International Electrotechnical Commission Technical Report 61850-90-7. This paper focuses on methods to quantify EPS support functions for DER certification. Sandia National Laboratories and Underwriters Laboratories, in collaboration with industry stakeholders, have developed a draft test protocol that efficiently and effectively evaluates support-function capabilities. This paper describes the functions, their intended use, and results of EPS support functions in a controlled laboratory environment.