• DocumentCode
    3724658
  • Title

    A method of accurate co-simulation by considering lumped port setting in EM simulator

  • Author

    Haijun Fan;Wenzhi Wang;Xianling Liang;Junping Geng;Ronghong Jin;Jingfeng Chen;Xilang Zhou

  • Author_Institution
    Department of Electronic Engineering, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China
  • fYear
    2015
  • fDate
    6/1/2015 12:00:00 AM
  • Firstpage
    108
  • Lastpage
    112
  • Abstract
    This paper introduces a method of accurate co-simulation by considering lumped port setting in EM simulator. In this method, various equivalent circuit parameters can be obtained with different lumped port settings in EM simulator, so that the parameters of the element used for co-simulation should correspond to the particular lumped port setting in EM simulator. For verification, a resistor and a p-i-n diode are used as examples. The measured results coincide well with co-simulated results under different lumped port settings.
  • Keywords
    "P-i-n diodes","Resistors","Equivalent circuits","Integrated circuit modeling","Switches","Connectors","Calibration"
  • Publisher
    ieee
  • Conference_Titel
    Antennas and Propagation (APCAP), 2015 IEEE 4th Asia-Pacific Conference on
  • Type

    conf

  • DOI
    10.1109/APCAP.2015.7374291
  • Filename
    7374291
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=3724658