SPICE models of barrier compared to measured data

Author

Lundgren, Urban ; Carlsson, Jan ; Delsing, Jerker

Author_Institution

Lulea Univ. of Technol., Sweden

Volume

1

fYear

2001

fDate

2001

Firstpage

142

Abstract

SPICE models of electromagnetic zone barrier are devised. The models are based on data from 2D and 3D Maxwell equation solvers. A transfer impedance approach modeled incident electromagnetic waves in SPICE. Test systems using D-sub connectors, passive surface mounted filters and encapsulation were designed. Test system verification measurements were made in a fully anechoic chamber. The coupling through the zone barriers was measured. Good agreement was found between simulated and measured data

Keywords

SPICE; anechoic chambers (electromagnetic); electromagnetic compatibility; electromagnetic coupling; printed circuit testing; 2D Maxwell equation solvers; 3D Maxwell equation solvers; D-sub connectors; EM coupling measurement; EMC; SPICE models; anechoic chamber; electromagnetic zone barrier; encapsulation; incident electromagnetic waves modeling; multi conductor transmission line; passive surface mounted filters; transfer impedance; Connectors; Electromagnetic measurements; Electromagnetic modeling; Electromagnetic scattering; Encapsulation; Maxwell equations; Passive filters; SPICE; Surface impedance; System testing;

fLanguage

English

Publisher

ieee

Conference_Titel

Electromagnetic Compatibility, 2001. EMC. 2001 IEEE International Symposium on

Conference_Location

Montreal, Que.

Print_ISBN

0-7803-6569-0

Type

conf

DOI

10.1109/ISEMC.2001.950571

Filename

950571