DocumentCode :
3749599
Title :
A 1.8?2.3 GHz broadband Doherty power amplifier with a minimized impedance transformation ratio
Author :
Mengsu Yang;Jing Xia;Anding Zhu
Author_Institution :
RF & Microwave Research Group, University College Dublin, Ireland
Volume :
1
fYear :
2015
Firstpage :
1
Lastpage :
3
Abstract :
In this paper, the design and measurement results of a 1.8 GHz to 2.3 GHz broadband Doherty power amplifier (DPA) are reported. A modified load modulation network is designed to minimize impedance transformation ratio over the entire dynamic range for the purpose of extending the operating bandwidth. Experimental results show that the drain efficiency of the proposed DPA maintains above 50% and 63% with continuous wave input signal powers of 26 dBm and 34 dBm, respectively, from 1.8 GHz to 2.3 GHz. When stimulated by a 60-MHz, 12-carrier UMTS signal at 2.14 GHz, the proposed DPA achieved an average efficiency of 53% at 7.6 dB back-off, while the corresponding adjacent channel leakage ratio is linearized to -48.4 dBc with digital predistortion.
Keywords :
"Broadband amplifiers","Predistortion","Wideband","Power generation","Chirp modulation"
Publisher :
ieee
Conference_Titel :
Microwave Conference (APMC), 2015 Asia-Pacific
Print_ISBN :
978-1-4799-8765-8
Type :
conf
DOI :
10.1109/APMC.2015.7411667
Filename :
7411667
Link To Document :
بازگشت