Title :
Experimental verification of PEEC based electric field simulations
Author_Institution :
Lulea Univ. of Technol., Sweden
Abstract :
Different ways to simulate the measured radiated electric field for printed circuit boards using partial element equivalent circuit (PEEC) models has been investigated. Full and simplified PEEC models have been used with post-processing algorithms and an electric field sensor directly incorporated in the PEEC simulations. Calculated and simulated field strengths for a simple PCB are compared to measurements taken in an anechoic EMC chamber. It is shown that the post-processing equations compare better to measurements then the electric field sensor
Keywords :
anechoic chambers (electromagnetic); electric field measurement; electric sensing devices; electromagnetic compatibility; electromagnetic interference; equivalent circuits; printed circuit testing; PCB; PEEC models; anechoic EMC chamber; electric field sensor; field strengths; measured radiated electric field simulation; partial element equivalent circuit models; post-processing algorithms; post-processing equations; printed circuit boards; radiated emissions measurement; Circuit simulation; Circuit testing; Conductors; Current density; Electric variables measurement; Electromagnetic compatibility; Electromagnetic measurements; Equations; Equivalent circuits; Printed circuits;
Conference_Titel :
Electromagnetic Compatibility, 2001. EMC. 2001 IEEE International Symposium on
Conference_Location :
Montreal, Que.
Print_ISBN :
0-7803-6569-0
DOI :
10.1109/ISEMC.2001.950658
