DocumentCode
3758378
Title
Design of triple band printed slot antenna for WLAN/WiMAX applications
Author
Nipont Tangthong;Pinit Nuangpirom;Somsak Akatimagool
Author_Institution
Department of Teacher Training in Electrical Engineering, Faculty of Technical Education, King Mongkut´s University of Technology North Bangkok, Thailand
fYear
2015
Firstpage
1
Lastpage
4
Abstract
This paper presents the design of a triple band printed slot antenna for WLAN/WiMAX applications. The dual band notched characteristic is realized by adding two symmetrical strip lines into the side plan of slot antenna and split two symmetrical slots in the top plan of slot antenna. The proposed slot antenna can generate triple band (2.3-2.7 GHz, 3.28-3.88 GHz and 5.03-6.09 GHz) covering all frequencies bands of WLAN/WiMAX operation. The measured radiation patterns presented omni-directional and bi-directional antenna in xz and yz planes, respectively. The proposed slot antenna is suitable to apply for various WLAN/WiMAX applications.
Keywords
"Slot antennas","Antenna measurements","Antenna radiation patterns","Frequency measurement","Resonant frequency","Bandwidth"
Publisher
ieee
Conference_Titel
Antenna Measurements & Applications (CAMA), 2015 IEEE Conference on
Type
conf
DOI
10.1109/CAMA.2015.7428173
Filename
7428173
Link To Document