DocumentCode
379783
Title
Power factor pre-regulator (PFP) with an improved zero-current-switching (ZCS) PWM switch cell
Author
Choi, Hang-Seok ; Cho, B.H.
Author_Institution
Sch. of Electr. Eng., Seoul Nat. Univ., South Korea
Volume
1
fYear
2002
fDate
2002
Firstpage
19
Abstract
This paper proposes a new boost power factor preregulator (PFP) featuring zero-current-switching (ZCS). By employing an improved ZCS PWM switch cell, ZCS of all the active switches is achieved without additional current stress of the main switch. The additional conduction loss is reduced, since the circulating current for the soft switching flows only through the auxiliary circuit and a minimum number of switching devices are involved in the circulating current path. The diodes commutate softly and reverse recovery problems are alleviated. The voltage stress of the rectifier diode is reduced compared to the previous ZCS approaches. Design guidelines are described and verified by experimental results from the 1.2 kW prototype boost PFP
Keywords
AC-DC power convertors; DC-DC power convertors; PWM power convertors; power factor correction; rectifying circuits; switching circuits; 1.2 kW; PWM switch cell; ZCS; active switches; auxiliary circuit; circulating current; conduction loss; current stress; power factor pre-regulator; voltage stress; zero-current-switching; Diodes; Guidelines; Pulse width modulation; Reactive power; Rectifiers; Stress; Switches; Switching circuits; Voltage; Zero current switching;
fLanguage
English
Publisher
ieee
Conference_Titel
Power Conversion Conference, 2002. PCC-Osaka 2002. Proceedings of the
Conference_Location
Osaka
Print_ISBN
0-7803-7156-9
Type
conf
DOI
10.1109/PCC.2002.998506
Filename
998506
Link To Document