DocumentCode :
381765
Title :
Liquid sensor system using reflecting surface acoustic wave delay lines
Author :
Nomura, Tooru ; Saitoh, Atsushi
Author_Institution :
Shibaura Inst. of Technol., Tokyo, Japan
Volume :
1
fYear :
2002
fDate :
2002
Firstpage :
507
Abstract :
A new sensor has been designed by using SH-SAW device. Shear horizontal mode surface acoustic wave (SH-SAW) has a unique characteristic of complete reflection at the free edges of the substrate. The SH-SAW are excited on a 36° YX LiTaO3 and the right angle edge of the substrate has been used to reflect these waves. Both the phase and amplitude of the SH-SAW reflected from the edge were measured as a response of the sensor probe. Several experiments were performed to verify the edge reflection type SAW sensor in viscous and ionic liquids. Experimental results showed that the sensor is very suitable for sensing of liquid phase.
Keywords :
ionic conductivity; lithium compounds; surface acoustic wave delay lines; surface acoustic wave sensors; viscosity measurement; LiTaO3; SH-SAW device; amplitude; complete reflection; edge reflection type SAW sensor; ionic liquids; liquid sensor system; phase; reflecting surface acoustic wave delay lines; sensor probe; shear horizontal mode surface acoustic wave; viscous liquids; Acoustic reflection; Acoustic sensors; Acoustic waves; Delay lines; Phase measurement; Probes; Sensor phenomena and characterization; Sensor systems; Surface acoustic wave devices; Surface acoustic waves;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Sensors, 2002. Proceedings of IEEE
Print_ISBN :
0-7803-7454-1
Type :
conf
DOI :
10.1109/ICSENS.2002.1037146
Filename :
1037146
Link To Document :
بازگشت