Signal-to-noise ratio analysis of 100 Gb/s demultiplexing using nonlinear optical loop mirror

This paper investigates experimentally and theoretically the signal-to-noise ratio (SNR) characteristics of 100 Gb/s all-optical demultiplexing using a nonlinear optical loop mirror (NOLM). The analysis takes into account two effects that degrade the SNR associated with NOLM demultiplexing. First is channel crosstalk originating from the leakage of nontarget channels. Second is the intensity fluctuations of demultiplexed signals caused by the combined effects of timing jitter and a profile of the switching window. Considering these two effects, power penalties associated with NOLM. Demultiplexing are theoretically evaluated using the conventional noise theory of an optical receiver followed by an optical preamplifier. Experimental results of bit error rate measurements for 100 Gb/s demultiplexing using three different NOLMs with different intrinsic crosstalk values, defined by signal transmittance in the absence of control pulses, show that the power penalties are in good agreement with the evaluation based upon our proposed analysis. It can be found from our investigation in demultiplexing from 100 to 10 Gb/s that intrinsic crosstalk of less than -25 dB, corresponding to a coupling ratio, K, of |K-0.5|/spl les/0.03, is required for the power penalty of less than 1 dB. The root-mean-square (rms) value of the relative timing jitter necessary for obtaining a sufficient timing tolerance width for combining control and signal pulses is determined.