A merged gain-variable RF front-end design for a 2GHz WCDMA DCR application I

Author

Koh, Kwang-Jin ; Park, Mun-Yang ; Yu, Hyun-Kyu

Volume

2

fYear

2002

fDate

4-7 Aug. 2002

Abstract

A merged variable gain differential CMOS LNA and mixer is proposed for a 2GHz WCDMA DCR application. Variable gain stage is placed before frequency down-mixing stage to increase system dynamic range. To increase LO to RF isolation, thus to overcome DC-offset problem, we use 0.18μm triple-well CMOS process. The system shows 25dB and 12.5dB conversion gain at high gain mode and low gain mode respectively. In each case, the IIP2s are 18dBm and 29dBm, and IIP3s are 3dBm and 11dBm respectively. The overall power consumption is less than 18mW. The supply voltage is 1.8V and over-all chip size is 2.3mm×1.2mm.

Keywords

CMOS analogue integrated circuits; UHF amplifiers; UHF integrated circuits; UHF mixers; code division multiple access; 0.18 micron; 1.8 V; 12.5 dB; 2 GHz; 25 dB; CMOS LNA; WCDMA DCR application; conversion gain; gain mode; merged gain-variable RF front-end design; mixer; overall power consumption; system dynamic range; triple-well CMOS process; Application specific integrated circuits; CMOS process; Circuit noise; Dynamic range; Gain; Linearity; Multiaccess communication; Noise figure; Radio frequency; Radiofrequency integrated circuits;

fLanguage

English

Publisher

ieee

Conference_Titel

Circuits and Systems, 2002. MWSCAS-2002. The 2002 45th Midwest Symposium on

Print_ISBN

0-7803-7523-8

Type

conf

DOI

10.1109/MWSCAS.2002.1186896

Filename

1186896