A High Step-Down Multiple Output Converter With Wide Input Voltage Range Based on Quasi Two-Stage Architecture and Dual-Output LLC Resonant Converter

In this letter, a quasi two-stage architecture is proposed for wide input voltage range (voltage ranges ≈ 1:2) and high step-down multiple output conversion. A dc-DCX, which operates as a dc-dc converter with regulated output when the input voltage is low and as a dc-dc transformer with unregulated output when the input voltage is high, is adopted in the first stage to provide optimized intermediate dc-bus voltages for the second-stage point-of-load converters. The input and output of the dc-DCX are in series and connected to the total input voltage. Hence, part of the input power is directly transferred to the intermediate bus without conversion. The devices´ voltage stresses and the transformer turns ratio of the dc-DCX are reduced by using the proposed quasi two-stage architecture. Thus, the conversion efficiency is improved significantly. Furthermore, a dual-output LLC resonant converter with hybrid center-tapped and full-bridge rectifier is proposed for the dc-DCX to achieve high efficiency and high power density. A 100-W prototype with three outputs is built and tested to verify the analysis.