Analysis of explosively formed fuse experiments

Explosively formed fuse (EFF) opening switches have been used in a variety of applications to divert current in high explosive pulsed power (HEPP) experiments. Typically, EFF´s operate at 0.1-0.2 MA/(cm switch width), and have an /spl sim/2 /spl mu/s risetime to a resistance of 10´s-100´s m/spl Omega/. We have demonstrated voltage standoff of /spl sim/7 KV/(die pattern) in some configurations, and typical switches have up to 100 die patterns. In these operating regimes, we can divert large currents (10-20 MA) to low impedance loads, and produce voltage waveforms with risetime and shape determined by the shape of the resistance curve and amount of magnetic flux in the circuit. Progress in quantitatively modeling EFF performance with magnetohydrodynamic (MHD) codes has been slow, and much of our understanding regarding the operating principles of EFF switches still comes from small-scale experiments coupled with hydrodynamic (hydro) calculations. These experiments are typically conducted at currents of /spl sim/0.5 MA in a conductor 6.4 cm wide. A plane-wave detonation system is used to drive the EFF conductor into the forming die, and current and voltage are recorded. The resulting resistance profiles are compared to the hydro calculations to get insight into the operating mechanisms. Our original goals for EFF development were limited in scope, and in pursuing specific large systems, we have left behind a valuable body of small-scale test data that has been largely unused. We now have a charter to achieve a complete understanding of EFF devices, and our first step has been to review existing data. In this paper, we present some of the results of these investigations.