DocumentCode :
45349
Title :
Design of lowpass filter using novel stepped impedance resonator
Author :
Dehghani, K. ; Karimi, G. ; Lalbakhsh, A. ; Maki, S.V.
Author_Institution :
Electr. Eng. Dept., Islamic Azad Univ., Kermanshah, Iran
Volume :
50
Issue :
1
fYear :
2014
fDate :
January 2 2014
Firstpage :
37
Lastpage :
39
Abstract :
A new type of lowpass filter with an ultra-wide stopband, sharp transition and compact size is proposed. To reduce the circuit size, a bended transmission line is adopted in the stepped impedance resonators. To achieve a sharp roll-off, a pendulum-shaped resonator is implemented in the filter. The transition band is from 1.30 to 1.45 GHz with -3 and -20 dB, respectively. The stopband with an attenuation level better than 20 dB is from 1.45 up to 23.4 GHz, hence an ultra-wide stopband with 18th-harmonic suppression is achieved. Furthermore, the proposed filter exhibits an extremely small size of 0.09λg × 0.11λg where λg is the guided wavelength at the cutoff frequency.
Keywords :
UHF filters; band-stop filters; harmonics suppression; low-pass filters; microwave filters; resonator filters; transmission lines; ultra wideband technology; bended transmission line; circuit size reduction; compact size; cut-off frequency; frequency 1.30 GHz to 1.45 GHz; frequency 1.45 GHz to 23.4 GHz; guided wavelength; harmonic suppression; lowpass filter design; pendulum-shaped resonator; sharp transition; stepped impedance resonator; ultrawide stopband;
fLanguage :
English
Journal_Title :
Electronics Letters
Publisher :
iet
ISSN :
0013-5194
Type :
jour
DOI :
10.1049/el.2013.3144
Filename :
6698946
Link To Document :
بازگشت