DocumentCode :
469
Title :
Simulation-based validation for four- dimensional multi-channel ultrasound current source density imaging
Author :
Zhaohui Wang ; Witte, Russell S.
Author_Institution :
Electr. & Comput. Eng. Dept., Univ. of Arizona, Tucson, AZ, USA
Volume :
61
Issue :
3
fYear :
2014
fDate :
Mar-14
Firstpage :
420
Lastpage :
427
Abstract :
Ultrasound current source density imaging (UCSDI), which has application to the heart and brain, exploits the acoustoelectric (AE) effect and Ohm´s law to detect and map an electrical current distribution. In this study, we describe 4-D UCSDI simulations of a dipole field for comparison and validation with bench-top experiments. The simulations consider the properties of the ultrasound pulse as it passes through a conductive medium, the electric field of the injected dipole, and the lead field of the detectors. In the simulation, the lead fields of detectors and electric field of the dipole were calculated by the finite element (FE) method, and the convolution and correlation in the computation of the detected AE voltage signal were accelerated using 3-D fast Fourier transforms. In the bench-top experiment, an electric dipole was produced in a bath of 0.9% NaCl solution containing two electrodes, which injected an ac pulse (200 Hz, 3 cycles) ranging from 0 to 140 mA. Stimulating and recording electrodes were placed in a custom electrode chamber made on a rapid prototype printer. Each electrode could be positioned anywhere on an x-y grid (5 mm spacing) and individually adjusted in the depth direction for precise control of the geometry of the current sources and detecting electrodes. A 1-MHz ultrasound beam was pulsed and focused through a plastic film to modulate the current distribution inside the saline-filled tank. AE signals were simultaneously detected at a sampling frequency of 15 MHz on multiple recording electrodes. A single recording electrode is sufficient to form volume images of the current flow and electric potentials. The AE potential is sensitive to the distance from the dipole, but is less sensitive to the angle between the detector and the dipole. Multi-channel UCSDI potentially improves 4-D mapping of bioelectric sources in the body at high spatial resolution, which is especially important for diagnosing and guiding treatment of cardiac and neuro- ogic disorders, including arrhythmia and epilepsy.
Keywords :
bioelectric potentials; biomedical electrodes; biomedical ultrasonics; brain; cardiology; convolution; current density; fast Fourier transforms; finite element analysis; image resolution; image sampling; medical disorders; medical image processing; neurophysiology; ultrasonic imaging; 3D fast Fourier transforms; 4D UCSDI simulations; AE potential; FEM; NaCl solution; Ohm law; ac pulse; acoustoelectric effect; arrhythmia; bench-top experiments; bioelectric sources; brain; cardiac disorder diagnosing; cardiac disorder treatment; conductive medium; convolution; current 0 mA to 140 mA; current distribution; current flow; custom electrode chamber; depth direction; detectors; dipole field; distance 5 mm; electric field; electric potentials; electrical current distribution; epilepsy; finite element method; four-dimensional multichannel ultrasound current source density imaging; frequency 1 MHz; frequency 15 MHz; frequency 200 Hz; heart; lead field; multiple recording electrodes; neurologic disorder diagnosing; neurologic disorder treatment; plastic film; rapid prototype printer; recording electrodes; saline-filled tank; sampling frequency; simulation-based validation; single recording electrode; spatial resolution; stimulating electrodes; ultrasound beam; ultrasound pulse; voltage signal; volume images; x-y grid; Correlation; Current density; Detectors; Electric potential; Electrodes; Transducers; Ultrasonic imaging;
fLanguage :
English
Journal_Title :
Ultrasonics, Ferroelectrics, and Frequency Control, IEEE Transactions on
Publisher :
ieee
ISSN :
0885-3010
Type :
jour
DOI :
10.1109/TUFFC.2014.2927
Filename :
6746320
Link To Document :
بازگشت