A Four-Stage XRAM Generator as Inductive Pulsed Power Supply for a Small-Caliber Railgun

A four-stage XRAM generator is built and then applied to a railgun having a caliber of 15 × 15 mm. The XRAM generator is based on 1-mH Brooks coils and on standard high-power thyristors which are employed as opening switches according to the ICCOS countercurrent commutation principle. The coils of the generator are charged with a current of 10 kA, which corresponds to an energy of 200 kJ. The current is successfully commutated and a pulse with a maximum current of 40 kA is applied to the railgun. Consequently, a projectile with a total weight of 33 g is accelerated to 157 m/s within the railgun length of 2.1 m. The semiconductor switches are exposed to a steep voltage rise due to the muzzle flash when the projectile leaves the railgun without their critical limit being exceeded. Thus, the successful operation of the XRAM generator using semiconductor switches during railgun experiments is demonstrated. Furthermore, we are able to show in a further experiment that the muzzle flash of the railgun can be significantly reduced by switching the XRAM back into charging mode when the projectile leaves the bore. This method also allows the conservation of the energy that remains in the coils after the exit of the projectile from the railgun.