DocumentCode
518427
Title
Notice of Retraction
Size effect on load bearing force of rubber isolator with pre-buckled struts
Author
Zhao, H. ; Wang, M.J.
Author_Institution
Sch. of Mech. Eng., Dalian Univ. of Technol., Dalian, China
Volume
5
fYear
2010
fDate
16-18 April 2010
Abstract
Notice of Retraction
After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE´s Publication Principles.
We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper.
The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org.
Load bearing force of the rubber isolator for vibration isolation should be predicted during their design and development stage. In this paper, the size effect on load bearing force of rubber isolator with pre-buckled struts is studied using the finite element method. The relationships between load bearing force at different compression displacement and dimensions of pre-buckled strut, i.e., strut-angle, strut-width and strut-height, are investigated. The master curve which used to describe the load bearing force at a give compression displacement is constructed by introductions of the shift factor of strut-width and the shift factor of strut-angle, which can be expressed by a quadratic function. An excellent agreement between theory and experimental data has been observed on experiment, which indicates the validity of the constructed function. The research results will help researchers to perform structural design as well as predicted the load bearing force of a rubber isolator with pre-buckled struts.
After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE´s Publication Principles.
We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper.
The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org.
Load bearing force of the rubber isolator for vibration isolation should be predicted during their design and development stage. In this paper, the size effect on load bearing force of rubber isolator with pre-buckled struts is studied using the finite element method. The relationships between load bearing force at different compression displacement and dimensions of pre-buckled strut, i.e., strut-angle, strut-width and strut-height, are investigated. The master curve which used to describe the load bearing force at a give compression displacement is constructed by introductions of the shift factor of strut-width and the shift factor of strut-angle, which can be expressed by a quadratic function. An excellent agreement between theory and experimental data has been observed on experiment, which indicates the validity of the constructed function. The research results will help researchers to perform structural design as well as predicted the load bearing force of a rubber isolator with pre-buckled struts.
Keywords
buckling; rubber; shock absorbers; vibration isolation; compression displacement; load bearing force; prebuckled struts; rubber isolator; vibration isolation; Boundary conditions; Capacitive sensors; Electric shock; Finite element methods; Isolation technology; Isolators; Mechanical engineering; Rubber industry; Vibrations; finite element method; load bearing force; master curve; rubber isolator; size effect;
fLanguage
English
Publisher
ieee
Conference_Titel
Computer Engineering and Technology (ICCET), 2010 2nd International Conference on
Conference_Location
Chengdu
Print_ISBN
978-1-4244-6347-3
Type
conf
DOI
10.1109/ICCET.2010.5486177
Filename
5486177
Link To Document