• DocumentCode
    563595
  • Title

    Influence of the surface-roughness of dielectric electrode on ozone generation in a silent discharge

  • Author

    Suzuki, Kenji ; Suda, Mitsunori ; Akagi, Seiji ; Yasuoka, Koichi ; Ishii, Shozo

  • Author_Institution
    Department of Electrical and Electronic Engineering Tokyo Institute of Technology, 2-12-1 O-okayama, Meguro-ku, 152-8552, Japan
  • fYear
    2000
  • fDate
    20-25 June 2000
  • Firstpage
    669
  • Lastpage
    672
  • Abstract
    Influence of surface roughness of dielectric electrode on high-density ozone generation is investigated. Tempax® glass and alumina ceramics are used as dielectrics. Average values of surface roughness of glass plate are varied from 0.004 µm to 6.6 µm, and these of alumina ceramics are varied from 0.045 µm to 7.0 µm. Ozone generation efficiency with a rough-surface plate is lower than that with a smooth-surface one. The efficiency reduction should be caused by the surface roughness that limits the growth of surface discharge.
  • Keywords
    Dielectrics; Glass; Thermal spraying; ozone generation; surface discharge; surface roughness;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    High-Power Particle Beams, 2000 13th International Conference on
  • Conference_Location
    Nagaoka, Japan
  • Type

    conf

  • Filename
    6219959
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=563595