Abstract :
The following topics are dealt with: understanding S-parameter vs. equivalent circuit-based models for surface mount RLC devices; WR-3 band butler matrix design using SU-8 photo-resist; microwave frequency discriminating devices based on composite right-/left-handed transmission line unit-cell; analytical solution for switched band matching networks; a dual band planar inverted f antenna for body-centric wireless communications; responses comparisons for coupled-resonator based diplexers; the effects of moisture on the performance of a highly sensitive microwave transmission line frequency discriminator; a proposed standard for loss measurements on printed circuit boards; ferrite at HF -susceptibility spectroscopy; and novel millimetre wave components for a W-band gyro-TWA.
Keywords :
RLC circuits; S-parameters; equivalent circuits; ferrites; metamaterials; microwave devices; millimetre wave devices; multiplexing equipment; photoresists; planar inverted-F antennas; printed circuits; radiocommunication; surface mount technology; switched networks; transmission lines; travelling wave amplifiers; HF-susceptibility spectroscopy; S-parameter; SU-8 photoresist; W-band gyro-TWA; WR-3 band butler matrix design; body-centric wireless communications; composite right-/left-handed transmission line unit-cell; coupled-resonator based diplexers; dual band planar inverted F antenna; equivalent circuit-based models; ferrite; highly sensitive microwave transmission line frequency discriminator; loss measurements standards; microwave components; microwave frequency discriminating devices; millimetre wave components; moisture effects; passive RF components; printed circuit boards; responses comparisons; surface mount RLC devices; switched band matching networks;
Conference_Titel :
Passive RF and Microwave Components, 3rd Annual Seminar on
Conference_Location :
London
Electronic_ISBN :
978-1-84919-542-3
