DocumentCode :
569248
Title :
Research on Water Droplet Size Influencing Factors in Watered Fuel Oil Prepared by Mechanical Agitation
Author :
Zhang, Lu ; Liu, Shuang ; Li, Na ; Yu, Ran ; Wu, Xiaomei ; Tang, Xiaojia ; Zhu, Yimin
Author_Institution :
Dalian Maritime Univ., Dalian, China
fYear :
2012
fDate :
July 31 2012-Aug. 2 2012
Firstpage :
727
Lastpage :
730
Abstract :
Water droplet size of disperse phase of watered fuel oil, which was prepared by a self-made mechanical micro-mixing device, was inspected under optical microscope. The effects of agitation speed, oil temperature and water content on water droplet size were investigated in this research. The experimental results showed that: water droplet size decreases with the increase of agitation speed and oil temperature at 1000-1300 r/min and 60-80°C, respectively. The lower the water content is, the smaller the size of water droplet will be, and the water content is better to be 3-5%.
Keywords :
drops; fuel; fuel processing; microfabrication; mixing; oils; optical microscopy; water; agitation speed effects; mechanical agitation; oil disperse phase; oil temperature effects; optical microscope; self-made mechanical micromixing device; temperature 60 degC to 80 degC; water content effects; water droplet size influencing factors; watered fuel oil; Combustion; Fuels; Microscopy; Optical microscopy; Temperature control; Water pollution; Water resources; agitation speed; oil temperature; water content; water droplet size; watered fuel oil;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Digital Manufacturing and Automation (ICDMA), 2012 Third International Conference on
Conference_Location :
GuiLin
Print_ISBN :
978-1-4673-2217-1
Type :
conf
DOI :
10.1109/ICDMA.2012.172
Filename :
6298620
Link To Document :
بازگشت