Title :
UWB microstrip antenna based on circular patch topology with stepped blocks (wing)
Author :
Sulaiman, M.A. ; Ali, M.T. ; Pasya, I. ; Ramli, N. ; Alias, H. ; Ya´acob, N.
Author_Institution :
Fac. of Electr. Eng., Univ. Teknol. MARA Malaysia, Shah Alam, Malaysia
Abstract :
This paper presents the design of Ultra Wideband (UWB) microstrip antenna consisting of a circular monopole patch antenna with 3 block stepped (wing). The antenna design is an improvement from previous research and it is simulated using CST Microwave Studio software. This antenna was designed on Rogers 5880 printed circuit board (PCB) with overall size of 26 × 40 × 0.787 mm3 and dielectric substrate, εr = 2.2. The performance of the designed antenna was analyzed in term of bandwidth, gain, return loss, radiation pattern, and verified through actual measurement of the fabricated antenna. 10 dB return loss bandwidth from 3.37 GHz to 10.44 GHz based on 50 ohm characteristic impedance for the transmission line model was obtained.
Keywords :
antenna radiation patterns; microstrip antennas; monopole antennas; printed circuits; transmission lines; ultra wideband antennas; CST Microwave Studio software; PCB; Rogers 5880 printed circuit board; UWB microstrip antenna; antenna design; antenna radiation pattern; characteristic impedance; circular monopole patch antenna; circular patch topology; dielectric substrate; frequency 3.37 GHz to 10.44 GHz; loss 10 dB; resistance 50 ohm; return loss; stepped blocks; transmission line model; ultrawideband microstrip antenna; Antenna measurements; Antenna radiation patterns; Bandwidth; Microstrip; Microstrip antennas; Microwave antennas; Ultra wideband antennas; Antenna; CST; Microstrip; UWB; partial ground plane;
Conference_Titel :
Wireless Technology and Applications (ISWTA), 2012 IEEE Symposium on
Conference_Location :
Bandung
Print_ISBN :
978-1-4673-2209-6
DOI :
10.1109/ISWTA.2012.6373857
