Analysis of starting and synchronization process for line start IPM motors

Author

Rabbi, S.F. ; Rahman, Md Arifur

Author_Institution

Fac. of Eng. & Appl. Sci., Univ. of Newfoundland, St. John´s, NL, Canada

fYear

2012

fDate

20-22 Dec. 2012

Firstpage

311

Lastpage

314

Abstract

This paper presents an improved analytical method for determining the synchronizing capability of a line start interior permanent magnet (IPM) synchronous motor. Approximate solution techniques based on average torque analysis for determining the critical slip and maximum inertia are also presented. A dynamic d-q axis model of the motor is developed to investigate the run-up response as well as synchronization capability of line start IPM synchronous motors. The start-up and synchronization performances of a 1hp 208V 4-pole line start IPM motor for various loads have been obtained using MATLAB. Experimental investigations have been also carried out for the same 1 hp IPM motor and test results are presented to support simulation results.

Keywords

permanent magnet motors; starting; synchronous motors; torque motors; Matlab; critical slip; dynamic d-q axis model; interior permanent magnet; motor start-up; pole line start IPM synchronous motor; run-up response; synchronization process; torque analysis; voltage 208 V; Interior permanent magnet; brake torque; critical inertia; critical slip; run-up responses; synchronization;

fLanguage

English

Publisher

ieee

Conference_Titel

Electrical & Computer Engineering (ICECE), 2012 7th International Conference on

Conference_Location

Dhaka

Print_ISBN

978-1-4673-1434-3

Type

conf

DOI

10.1109/ICECE.2012.6471548

Filename

6471548