DocumentCode :
601962
Title :
On-time compensation method for CRM/DCM Boost PFC converter
Author :
Chen, Yang-Lin ; Chen, Yaow-Ming ; Chen, Hong-Jyun
Author_Institution :
Electric Energy Processing Laboratory (EEPro), Department of Electrical Engineering, National Taiwan University, Taipei, Taiwan
fYear :
2013
fDate :
17-21 March 2013
Firstpage :
3096
Lastpage :
3100
Abstract :
This paper proposes an on-time compensation method for CRMIDCM Boost PFC converter, which is based on the average current control without using multiplier. The proposed method can compensate the input current distortion caused by zero voltage switching (ZVS), valley switching (VS) and switching frequency limitation (SFL). A low-cost sample and hold (S/H) circuit is used to replace the multiplier in the average current control loop. By SIMPLIS simulation, a 160W CRMIDCM boost PFC converter with ZVS/VS and SFL function is used to verify the feasibility of the proposed on-time compensation method. Finally, heavy/light load and high/low line voltage conditions will also be presented in this paper.
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Applied Power Electronics Conference and Exposition (APEC), 2013 Twenty-Eighth Annual IEEE
Conference_Location :
Long Beach, CA, USA
ISSN :
1048-2334
Print_ISBN :
978-1-4673-4354-1
Electronic_ISBN :
1048-2334
Type :
conf
DOI :
10.1109/APEC.2013.6520742
Filename :
6520742
Link To Document :
بازگشت