DocumentCode :
615641
Title :
Practical aspects of PD localization for long length power cables
Author :
Wild, M. ; Tenbohlen, Stefan ; Gulski, Edward ; Jongen, Rogier ; de Vries, F.
Author_Institution :
Univ. of Stuttgart, Stuttgart, Germany
fYear :
2013
fDate :
2-5 June 2013
Firstpage :
499
Lastpage :
503
Abstract :
The single sided PD measurement on power cable circuits is a common used technique for onsite PD detection and localization. Time domain reflectometry (TDR) of the measured pulses is generally implemented for locating the PD pulse origin. To get higher sensitivity in PD measurements and increased localization achievements a double sided measurement can be performed. Crucial for localization is the attenuation of the PD pulse amplitudes as a result of travelling along cable length. For this purpose some examples for classical one-sided TDR and double sided measurements are discussed.
Keywords :
partial discharge measurement; power cables; time-domain reflectometry; PD localization; PD measurement; PD pulse amplitudes; PD pulse origin; cable length; long length power cables; onsite PD detection; power cable circuits; time domain reflectometry; Attenuation; Detectors; Partial discharges; Power cables; Pulse measurements; Reflection; Sensitivity; Long power cables; On-site cable testing; PD localization; Partial discharges;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Electrical Insulation Conference (EIC), 2013 IEEE
Conference_Location :
Ottawa, ON
Print_ISBN :
978-1-4673-4738-9
Electronic_ISBN :
978-1-4673-4739-6
Type :
conf
DOI :
10.1109/EIC.2013.6554298
Filename :
6554298
Link To Document :
بازگشت