Title :
A planar wideband microstrip patch antenna for UHF RFID tag
Author :
Bashri, M.S.R. ; Ibrahimy, M.I. ; Motakabber, S.M.A.
Author_Institution :
Dept. of Electr. & Comput. Eng., Int. Islamic Univ. Malaysia (IIUM), Kuala Lumpur, Malaysia
Abstract :
In this research, a planar wideband microstrip patch antenna for passive radio frequency identification (RFID) tag is proposed. To enable universal operation by covering the operating frequency of ultra-high frequency (UHF) RFID band from 860 MHz to 960 MHz, two C-shaped patches are employed. Both of the patches are inductively coupled fed by a rectangular loop feeding network for complex impedance matching with the referenced microchip impedance. The proposed antenna is designed for tagging metallic objects. To simplify the fabrication process and to reduce cost, a planar antenna structure is chosen over multi or cross layered configuration. The simulation and measurement results show impedance bandwidth of 159 MHz and 155 MHz (Return loss ≥ 3 dB) respectively when mounted on metal plate.
Keywords :
UHF antennas; broadband antennas; cost reduction; impedance matching; microstrip antennas; planar antennas; radiofrequency identification; C-shaped patches; UHF RFID tag; bandwidth 155 MHz; bandwidth 159 MHz; cost reduction; fabrication process; frequency 860 MHz to 960 MHz; impedance matching; metal plate; metallic object tagging; passive radio frequency identification tag; planar antenna structure; planar wideband microstrip patch antenna; rectangular loop feeding network; referenced microchip impedance; universal operation; Antenna measurements; Impedance; Microstrip antennas; Patch antennas; Radiofrequency identification; Complex impedance matching; metallic objects; patch antenna; radio frequency identification (RFID); ultra-high frequency (UHF);
Conference_Titel :
Space Science and Communication (IconSpace), 2013 IEEE International Conference on
Conference_Location :
Melaka
DOI :
10.1109/IconSpace.2013.6599485
