DocumentCode :
693051
Title :
Configuration modes of FPGA chips for embedded systems applied to advanced manufacturing technology
Author :
Deng Tao ; Jia Qingzhong ; Xu Hong
Author_Institution :
Key Lab. of Dynamics & Control of Flight, Beijing Inst. of Technol., Beijing, China
fYear :
2013
fDate :
20-22 Dec. 2013
Firstpage :
3214
Lastpage :
3217
Abstract :
The work presented in this paper focuses on the configuration modes of FPGA (field programmable gate array) chips. The methods adopted extensively by the authors are mainly derived from the data sheets provided by the chip manufacturers and the technical requirements of advanced manufacturing. When the FPGA chips work as the special function modules of the embedded systems, the PS (passive serial) mode and the JTAG (joint test action group) mode are frequently used by the designers, with the advantage described as follows: the connection-circuit is simple and there is no limitation of minimum clock frequency. The configuration circuit and the integral configuration timing for the two modes are given in this paper. As to the FPGA chips of multiple configuration modes, we can select the most efficient mode according to the field need of advanced manufacturing.
Keywords :
embedded systems; field programmable gate arrays; manufacturing systems; FPGA chips; JTAG mode; PS mode; advanced manufacturing technology; configuration modes; connection circuit; embedded systems; field programmable gate array chips; joint test action group mode; passive serial mode; Clocks; Embedded systems; Field programmable gate arrays; Manufacturing; Microprocessors; Ports (Computers); Timing; FPGA chip; configuation timing; configuration circuit; enbedded system;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Mechatronic Sciences, Electric Engineering and Computer (MEC), Proceedings 2013 International Conference on
Conference_Location :
Shengyang
Print_ISBN :
978-1-4799-2564-3
Type :
conf
DOI :
10.1109/MEC.2013.6885572
Filename :
6885572
Link To Document :
بازگشت