Title :
Research on Bicycle Built-in Pump Device Based on ADAMS
Author :
Yu Yuan ; Ding Hai ; Luan TianYu ; Luan Guo Qiang
Author_Institution :
Coll. of Mech. & Electr. Eng., Beijing Univ. of Chem. Technol., Beijing, China
Abstract :
In order to solve the problem that the pump is not convenient to carry during the bicycle trip, a bicycle builtin pump device is introduced in this paper. The motion analysis and simulation of this device are implemented based on ADMAS. Moreover, an air valve adjusting valve is installed near the air tap of the rear-wheel to monitor the tire pressure. When the tire pressure is higher than the set pressure of the air valve, the air will be automatically released, which can ensure the safety of the tire. In the experiment, this built-in pump device needs 130 s to pump a tire (24×1.25-510 mm) from 100 kPa to 200 kPa.
Keywords :
bicycles; computerised monitoring; pressure measurement; pumps; safety; tyres; valves; wheels; ADAMS; air valve adjusting valve; bicycle built-in pump device; motion analysis; pressure 100 kPa to 200 kPa; rear-wheel; safety; time 130 s; tire pressure monitoring; Bicycles; Joints; Pistons; Tire pressure; Valves; Wheels; Automatic Dynamic Analysis of Mechanical Systems (ADAMS); Bicycle; Cam; Pump Device;
Conference_Titel :
Information Science and Control Engineering (ICISCE), 2015 2nd International Conference on
Conference_Location :
Shanghai
Print_ISBN :
978-1-4673-6849-0
DOI :
10.1109/ICISCE.2015.200
