Mechanical design of a gravity-balancing wearable exoskeleton for the motion enhancement of human upper limb

Powered exoskeletons can provide motion enhancement for both healthy and physically challenged people. Upper limb exoskeletons are required to have multiple degrees-of-freedom and can still produce sufficient force to augment the upper limb motion. The design using serial mechanisms usually results in a complicated and bulky exoskeleton that prevents itself from being wearable. This paper presents a new exoskeleton design aimed to achieve compactness and wearability. We consider a shoulder exoskeleton that consists of a parallel spherical mechanism with two slider crank mechanisms. The actuators can be placed on a stationary platform and attached closely to human body. Thus a better inertia property can be obtained while maintaining lightweight. Through the use of a gravity-balancing mechanism, the required actuator power becomes smaller and with better efficiency. A static model is developed to analyze and optimize the exoskeleton. Through illustrations of a prototype, the exoskeleton is shown to be wearable and can provide adequate motion enhancement of a human´s upper limb.