DocumentCode :
723543
Title :
Performance analysis of an RF MEMS TPoS resonator using FE modelling
Author :
Farrugia, Russell ; Grech, Ivan ; Casha, Owen ; Micallef, Joseph ; Gatt, Edward
Author_Institution :
Dept. of Microelectron. & Nanoelectron., Univ. of Malta, Msida, Malta
fYear :
2015
fDate :
27-30 April 2015
Firstpage :
1
Lastpage :
6
Abstract :
This paper presents an analysis, using finite element modelling, of a 40 MHz contour-mode RF MEMS resonator based on the SINTEF thin-film piezoelectric-onsubstrate (TPoS) fabrication technology. Novel simulation techniques are proposed which enable an exhaustive analysis of the relevant resonator characteristics including temperature drift and quality factor. This model also enables the analysis of possible tuning techniques which can be used to compensate for temperature and process-induced variations in the resonant frequency. The effect of the thickness ratio of the PZT film to the substrate on the resonant frequency and frequency shift is also discussed.
Keywords :
Q-factor; finite element analysis; micromechanical resonators; FE modelling; PZT film; RF MEMS TPoS resonator; finite element modelling; frequency shift; quality factor; resonant frequency; temperature drift; thin-film piezoelectric-onsubstrate fabrication technology; Damping; Finite element analysis; Micromechanical devices; Radio frequency; Resonant frequency; Substrates; Temperature; MEMS Resonator; MEMS filter; PZT; Piezoelectric; RF MEMS; TPoS;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP), 2015 Symposium on
Conference_Location :
Montpellier
Print_ISBN :
978-1-4799-8627-9
Type :
conf
DOI :
10.1109/DTIP.2015.7161004
Filename :
7161004
Link To Document :
بازگشت