Analysis of high speed squirrel cage induction motors

Author

Klima, Jiri ; Mach, Martin ; Vitek, Ondrej

Author_Institution

Dept. of Power Electr. & Electron. Eng., Brno Univ. of Technol., Brno, Czech Republic

fYear

2015

fDate

10-13 June 2015

Firstpage

1302

Lastpage

1305

Abstract

This paper deals with an analysis of three phase, two pole high speed induction machines. Our test motor was supplied from frequency converter and laboratory power supply with very low total harmonic distortion. Test bench was used to experimentally verify the results from simulation. The finite element model of induction motor was created in ANSYS Maxwell software. The model of frequency converter was created in ANSYS Simplorer and connect with ANSYS Maxwell model due to their co-simulation.

Keywords

finite element analysis; frequency convertors; harmonic distortion; squirrel cage motors; ANSYS Maxwell model; ANSYS Maxwell software; ANSYS Simplorer; finite element model; frequency converter; high speed squirrel cage induction motors; laboratory power supply; test bench; test motor; three phase two pole high speed induction machines; total harmonic distortion; Finite element analysis; Frequency conversion; Harmonic analysis; Induction motors; Loss measurement; Rotors; Voltage measurement; finite element method; frequency converter; high-speed; induction motor; pulse width modulation; test bench;

fLanguage

English

Publisher

ieee

Conference_Titel

Environment and Electrical Engineering (EEEIC), 2015 IEEE 15th International Conference on

Conference_Location

Rome

Print_ISBN

978-1-4799-7992-9

Type

conf

DOI

10.1109/EEEIC.2015.7165358

Filename

7165358