DocumentCode
731186
Title
Few seconds and −40kV compact high voltage pulse power supply
Author
Kim, S.C. ; Heo, H. ; Gong, H.S. ; Kim, S.H. ; Nam, S.H.
Author_Institution
Pohang Accel. Lab., POSTECH, Pohang, South Korea
fYear
2015
fDate
24-28 May 2015
Firstpage
1
Lastpage
1
Abstract
To drive cathode of Magnetron Injection Gun (MIG), long pulse high voltage power supply (HVPS) is needed. HVPS have to be few seconds continuously -40 kV, 280 kW with rise and fall time less then 1 ms, and Included ripple stability of HV output is less than 1%. In order to develop HVPS, eight HVPSs are parallel operated by each power supply phase shifted PI control. HV pulse generation is performed by method ON and OFF of all HVPS gate drive pulse, simultaneity. Maximum output voltage and current of unit HVPS are -40kV and 1.2 A. In this paper, we will discuss topology, simulation and test results of HVPS.
Keywords
PI control; magnetrons; power supplies to apparatus; HV pulse generation; HVPS gate drive pulse; MIG; high voltage power supply; high voltage pulse power supply; magnetron injection gun; power 280 kW; power supply phase shifted PI control; ripple stability; voltage -40 kV; Cathodes; Logic gates; Pi control; Power supplies; Pulse generation; Stability analysis; Topology;
fLanguage
English
Publisher
ieee
Conference_Titel
Plasma Sciences (ICOPS), 2015 IEEE International Conference on
Conference_Location
Antalya
Type
conf
DOI
10.1109/PLASMA.2015.7179669
Filename
7179669
Link To Document