Title :
Line input AC-to-DC conversion and filter capacitor design
Author :
Doval-Gandoy, Jesus ; Castro, Carlos ; Martínez, Moises C.
Author_Institution :
Departamento de Tecnologia Electronica, Univ. de Vigo, Spain
Abstract :
The aim of this paper is to present a theoretical and practical analysis of one of the most popular AC-DC converter topologies. This topology is used to feed a DC-DC switch-mode converter from dual-input-voltage operation (230 Vrms, 50 Hz/115 Vrms, 60 Hz). For European line voltages (220, 230, and 240 V), the full-bridge rectifier complies with the IEC-61000-3-2 class A standard, if the value of the capacitor is selected with the right criterion. Simple expressions are obtained for all RMS and peak currents and voltages. The mathematical analysis of this multifunctional AC-DC converter becomes very simple if the suitable assumptions are made. There is good agreement between experimental results and the mathematical analysis predictions.
Keywords :
AC-DC power convertors; DC-DC power convertors; IEC standards; bridge circuits; rectifying circuits; switched mode power supplies; switching convertors; 200 W; DC-DC switch-mode converter; IEC-61000-3-2 class A standard; capacitor value; dual-input-voltage operation; dual-range switching power supply; filter capacitor design; full-bridge rectifier; line input AC-to-DC conversion; mathematical analysis; multifunctional AC-DC converter; AC-DC power converters; Capacitors; DC-DC power converters; Feeds; Filters; Mathematical analysis; Rectifiers; Switching converters; Topology; Voltage;
Journal_Title :
Industry Applications, IEEE Transactions on
DOI :
10.1109/TIA.2003.814561
