Digital detection and fuzzy classification of partial discharge signals

This paper deals with digital acquisition, classification and analysis of the stochastic features of random pulse signals generated by partial discharge (PD) phenomena. Focus is made on a new measuring system for the digital acquisition of PD-pulse signals, which operates at a sampling rate high enough to avoid the frequency aliasing, but that provides an amount of PD pulses which enables PD stochastic analysis. A separation and classification method, based on a fuzzy classifier, is developed for the analysis of the acquired PD-pulse shape signals. The result of the fuzzy classification is a cluster of signals homogeneous in terms of stochastic features of PD pulses. The classification efficiency is evaluated resorting to the PD-pulse height and phase distributions analysis. The instrumentation, and the associated classification methodology, are applied to measure and analyze PD data recorded for mica-insulated stator bars and coils, where typical defects, occurring during normal operations, were simulated. It is shown that the proposed procedure enables PD-source identification to solve the identification problems which arise, in particular, when different sources of PD are simultaneously active. In addition fuzzy classification provides an efficient noise-rejection tool