Measurement of space charge in XLPE insulation under 50 Hz ac electric stresses using the LIPP method

Space charge is believed to play an important role in ac electrical ageing of polymeric insulation, particularly where electrical treeing is the dominant cause of premature failure. The majority of work to date has been on the space charge characteristics under dc electric stresses, whereas work on the dynamics and the role of space charge on electrical breakdown under 50 Hz ac conditions have only received limited attention. Consequently, a full understanding of space charge trapping and dynamics under ac operating conditions is required if ever more reliable polymer insulated cable systems are to be developed. The present paper reports on aspects of an on-going investigation into the measurement of space charge in XLPE insulation under 50 Hz ac stress using the laser induced pressure propagation (LIPP) technique. Some important features of the method are described such as, point on wave control of the laser and use of correction factors to offset variations in the laser power and ablation of the target material. Emphasis has also been placed on establishing a simple method for analysing data, termed "X-plots". Some preliminary results of the space charge and electric stress distribution of un-degassed and degassed crosslinked polyethylene (XLPE) plaques aged electrically under ac stress (30 kV_peak/mm) for 24 h are also presented