DocumentCode
760582
Title
A 140 Mbits/s Digital Transmission System for Coaxial Cable Using Partial Response Class 1 Line Code with Quantized Feedback
Author
Røste, T. ; Holte, N. ; Knapskog, S.J.
Author_Institution
Norwegian Institute of Technology, Trondheim, Norway
Volume
28
Issue
8
fYear
1980
fDate
8/1/1980 12:00:00 AM
Firstpage
1425
Lastpage
1430
Abstract
A comparison between different line codes suitable for transmission of 140 Mbit/s digital signals over 1.2/4.4 mm coaxial cable has been made using the computer optimization program, "OPUT." One alternative, the two level partial response class 1 (PR1), is chosen and a laboratory system has been built and tested. A block diagram of the system followed by a description is given. Performance of the system is presented and commented on. It is concluded that a PR1 system can be implemented with reasonable noise margin with a repeater spacing of 2.15 km for a 1.2/4.4 mm coaxial cable.
Keywords
Digital communications; Partial-response coding; Wire communication cables; Bandwidth; Broadcasting; Coaxial cables; Feedback; Laboratories; Phase change materials; Redundancy; Repeaters; System testing; Timing;
fLanguage
English
Journal_Title
Communications, IEEE Transactions on
Publisher
ieee
ISSN
0090-6778
Type
jour
DOI
10.1109/TCOM.1980.1094786
Filename
1094786
Link To Document